3-way manual globe valve

About 3-way Ball Valves. Three way ball valves have 3 ports. They are available in a variety of body materials and with all of the common end connections. They can be manually operated or automated with an electric or pneumatic actuator. They can be used as diverter valves, where flow a single inlet is diverted to either of the two other ports as the outlet. control flow. Therefore, use a globe-type valve that has the feature to control flow by opening the bypass valve. Moreover, it is ideal to choose the same flow characteristics and size as those of control valve. See the example of ideal control valve installation (Fig ) Fig Example of Control Valve Installation Fig Example of Control. 3-Way Diverting Ball Valves Instruction Manual Installation 1. Inspect shipping package, valve, linkage, and actuator for physical damage. If shipping damage has occurred notify appropriate carrier. Do not install. 2. Install valve with the proper ports as inlets and outlets. See drawings on page 1. Check that inlet and outlet of 2-way valves are correct; check that.

3-way globe valve service: mixing body rating: ansi body: bronze body trim: bronze stem: stainless steel astm a type packing: normal duty (epdm o-ring) valve action: normally closed flow characteristic: equal percentage rangeability: leakage rate: class iv controlled medium: water, 50% water-glycol solutions. Choose the right 3-way multi-port ball valve for mixing or diverting flow. Last updated on November 9th, Manual three-way L-pattern ball valves used as diverter valves are usually installed with the bottom port of the valve body as the common or flow entry port. 3/3-way ball valves interrupt or facilitate the medium flow. These valves, available worldwide, can be optionally equipped with a locking device to avoid unauthorized opening and shut-off; they support the safety of the entire system. Actuation Type: Manual; Handle Type: Ball valve; Connection Size: G 1/8 to G 1; Maximum Operating Pressure.

3-Way Manual Ball Valves. View CatalogDownload STP Files Line Drawings. Premium quality, consistently smooth operating manual valve. 1 1⁄2", 2" and 3" full port 3-Way ball valves. Valve body: Polypropylene, EPDM O-rings 2" valve maximum PSI: psi at 70° F (polypropylene) Ball: Polypropylene. Stem: stainless steel. About 3-way Ball Valves. Three way ball valves have 3 ports. They are available in a variety of body materials and with all of the common end connections. They can be manually operated or automated with an electric or pneumatic actuator. They can be used as diverter valves, where flow a single inlet is diverted to either of the two other ports as the outlet. Three-way valve Normally Open or Closed configurations for the Control Port and the Bypass Port must be verified by examining both the mechanical drawings and the valve and actuator.